118 Series Slim-Line Linear Position Sensor
About the product
The 118 series, with its compact 19mm diameter stainless steel housing, is an affordable, durable, accurate position sensor designed for a wide range of industrial applications. Stroke length 2-50mm. It is particularly suitable for OEMs seeking good sensor performance in situations where a small diameter "short body" sensor is required and cost is a concern. The device is compact and space efficient, responds over almost the entire length and provides a linear output proportional to displacement. P118 Standard - X118 ATEX /IECEX (gas/vapour) - E118 ATEX/IECEX (dust) - M118 ATEX/IECEX (mining) - G118 CSA (gas/vapour)-H118 CSA (dust)
Each unit is supplied with the output calibrated to the travel required by the customer, from 0-2mm to 0-50mm and with full EMC protection built in.
Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor is easy to install and set up. Mounting options include body clamps or a stainless steel mounting flange with two 3.2 mm by 30 degree wide slots on a 25 mm pitch. The stainless steel plunger can be supplied free or captive, with female M4 thread, or spring-loaded with a ball end. The P118 also offers a range of mechanical options, environmental sealing is to IP67.
Typical applications
-
Process
-
Valve & Actuator
-
Condition monitoring
-
Drilling & Rig
Certificates and standards
-
Atex
-
IECEX
-
CSA
Manufacturer
About the product
The 118 series, with its compact 19mm diameter stainless steel housing, is an affordable, durable, accurate position sensor designed for a wide range of industrial applications. Stroke length 2-50mm. It is particularly suitable for OEMs seeking good sensor performance in situations where a small diameter "short body" sensor is required and cost is a concern. The device is compact and space efficient, responds over almost the entire length and provides a linear output proportional to displacement. P118 Standard - X118 ATEX /IECEX (gas/vapour) - E118 ATEX/IECEX (dust) - M118 ATEX/IECEX (mining) - G118 CSA (gas/vapour)-H118 CSA (dust)
Each unit is supplied with the output calibrated to the travel required by the customer, from 0-2mm to 0-50mm and with full EMC protection built in.
Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor is easy to install and set up. Mounting options include body clamps or a stainless steel mounting flange with two 3.2 mm by 30 degree wide slots on a 25 mm pitch. The stainless steel plunger can be supplied free or captive, with female M4 thread, or spring-loaded with a ball end. The P118 also offers a range of mechanical options, environmental sealing is to IP67.
Contact
-
Jorn Jul-Larsen
Manager, Sales & Marketing, Agency
+47 95 87 00 22 -
Roy Dahl
Sales Engineer, Agency
+47 95900734
